COMPOUND MITER SLIDE SAW 305ml
Model: LS1214 Slide Compound Miter Saw 305mm
Max Cut Depth: 120 mm
Max Cut Width: 270 mm
Miter Angle: Max 45 Degree’s Left Or 45 Degree’s Right – 71 x 260 mm L / 50 x260 mm R
Beval Angle: Max 45 Degree’s Left/Right – 71 x 155 L – Right 71 x 175 mm R 0 Beval Angel 120 x185 mm
Miter Angle: 52 Degree’s Right Zero Bevel 120 x 160 mm
Blade: Diameter 305 mm 60 Tpi – Medium Cut
Weight: 32 kg
Circular Saw - 185mm - Makita 5007 MG
Circular saw with a blade diameter of 185 mm.
Rubberised handle provides more control and comfort.
Twin, built in LED lights for improved visibility of the cut line.
Suitable for ripping & cross cutting
Max cutting capacities:
– at 90Â° – 63.5mm
– at 45Â° – 45mm
– 1800w motor
Variable speed Jigsaw.
Variable speed control dial (500-3,100 Strokes Per Minute) enables user to match the speed to the application.
Low profile design engineered for improved handling in compact areas.
Well-balance design (only 2.35 kgs) for reduced operator fatigue.
Lock-on button for continuous operation.
15 Amp reciprocating saw.
The handle has an ergonomically designed rubberized grip for more comfort and there is a large 2-finger trigger with lock-on button for added convenience.
This lightweight tool is ideal for framers, carpenters, electricians, plumbers, demolition work and other demanding cutting applications.
Metal Cut Off Saw - 355mm
Metal Cut Off Saw with a blade of 355 mm’s in diameter.
Spark diversion guard for operators safety.
Adjustable guide plate 45 degrees right and left at 3 locations.
Quick release vice.
Adjustable depth stop
GIB Screw Gun
Autofeed Screw Gun gives high operation efficiency delivered from fast rotational speed and improved screw strip management.
Has an ergonomically designed rubberised grip with Anti-Slip dimples to provide a steady hold in any conditions.
Will run on 3.0Ah BL1830 or 4.0Ah BL1840 batteries.
Impulse Nail Gun - Framer - 90mm
Gas nailer with Lithium-ion technology – recharges in 30 minutes.
Capable of firing up to 4000 nails per battery charge and using 1 fuel cell for approx 1200 nails.
This nailer is powerful compact and filled with features designed to make the GN900 super user-friendly and extremely reliable.
LED indication lights provide details of battery capacity and when charging is required.
Takes standard paper collated “D” head nails.
Nibbler has a die that rotates 360 degrees and a large 1/4 in. stroke for clean and precise work in keystone plate, deck plate and other corrugated sheet materials.
Comfortable to use no matter how long the job lasts, this tool has an ergonomic and slim design for easy gripping and weighs only 1.7 kg’s for easy handling.
Loaded with convenience features, including a built-in thickness gauge and lock-on sliding switch for continuous operation.
Angle Drill - 13mm
2 speed selection for drilling into timber or steel, high 1,200rpm/low 300rpm.
Perfect for drilling with self-feeding augers and forstner drill bits.
Built in safety clutch protects tool & operator in extreme circumstances.
Compact design with a short overall length of 138mm.
Max fastening torque: 160Nm
The power remaining in the battery can be indicated in 3 stages simply by pushing a button.
LED Job light with pre-glow and afterglow functions.
Model: DUB182 18v Cordless Blower
Air Speed: 80 Meters Per Second
Speed: 3 Settings
Weight: 1.7 kg (Without Batt)
Suitability: Good For Cleaning Down machinery, Clearing Holes In Masonry & General Cleaning